Skip to content
Suzuki Intruder Custom bike “Katana” by Easy

Suzuki Intruder Custom bike “Katana” by Easy



    Geolocation Rüsselsheim




    Suzuki Intruder parts

    The new paint job definitely has rarity. Exhaust system and Raiser were specially adapted to the body size of the driver to make even on longer trips a relaxed ride possible.

    • Except for frame and engine was completely gutted
    • Tank
    • Rear wheel on 280er
    • Turn signals, taillights and headlights

    Update Mahdi’s Easy Custom Bike was given an exclusive “Katana” airbrush

    Suzuki Intruder specs

    Engine Specs

    • Type 4-Stroke, Liquid-Cooled, Dohc, 54-Degree, V-Twin
    • Displacement 1783 Cm3
    • Bore x Stroke 4.4X3.6 In Or 112 Mm
    • Compression Ratio 10.5:1
    • Horsepower -/- Kw(Hp)/Rpm
    • Torque 0/- Lb-Ft/Rpm Or 0 Nm/Rpm
    • Fuel System Efi, Suzuki Dual Throttle Valve System (Sdtv)

    Transmission Specs

    • Gearbox 5-Speed, Manual
    • Clutch Wet Multi-Disc, Manual
    • Primary Drive
    • Final Drive Shaft

    Chassis Specs

    • Frame Steel
    • Front Suspension Inverted Telescopic, Coil Spring, Oil Damped
    • Rear Suspension Link Type, Coil Spring, Oil Damped
    • Front Brake Dual Hydraulic Discs
    • Rear Brake Single Hydraulic Disc

    Dimension Specs

    • Overall Length 95.5 In Or 2426 Mm
    • Overall Width 34.4 In Or 874 Mm
    • Seat Height 27.8 In Or 706 Mm
    • Weelbase 67.3 In Or 1709 Mm
    • Ground Clearance 5.1 In Or 130 Mm
    • Weight 764 Lbs Or 347 Kg
    • Fuel Capacity 5.2 Gallons Or 19.7 L

    Tyres Specs

    • Front 130/70R18M/C 63V, Tubeless
    • Rear 240/40R18M/C 79V, Tubeless
    Exit mobile version